Product Center

It is OPWILL's mission to promote continuous innovation in testing and measurement!

Products

Contact

Address: Room 1445, 6/F, Block A, Information Building, No. 28, Xinxi Road, Haidian District, Beijing
Postal code: 100085
Tel:+86 10 82771386/2866/3382
Fax:+86 10 82771782
400 hotline: 400 630 3382
Website: www.opwill.com

Products

OTC2400 OTDR Module

OTC2500 OTDR Module (MSA)

iOTDR -- series OTDR

iOTDR Series OTDR Tester is entirely new portable product released by OPWILL. Adopting Bluetooth technology allows engineers to conduct the test remotely on their portable Windows, or Android devices. It has rapid start technology and supports automatic and real-time test mode, which can guarantee engineers to examine and detect optical fibres or cables in core, metro, and access network with high flexibility, efficiency, and convenience.

FTS-300 -- Fiber Optic Cable Comprehensive Tester

FTS-300 is a comprehensive testing instrument for fiber optic cable repair that integrates eight functions: cable identification, optical time-domain reflectometer, intelligent optical link topology analysis, intelligent network testing tool, red light source, light source, optical power meter, and fiber end face microscope.

MEMS Switch -- MEMS Optical Switch Module

Opwill MEMS Optical Switch is based on micro-electro-mechanical system (MEMS) technology, which achieved low insertion loss and highly repeatability by rotating the mirror of MEMS chip.

OTM2800 -- Sync Module (PTP, 1588V2 Tester)

OTM2800 Synchronisation Analyser is specially designed for conducting clock synchronisation of PTN or Packet Ethernet. It is developed in accordance with IEEE1588v2, SyncE, 1PPS+ToD, Ethernet, and E1 such standards, provides a complete clock, frequency, and time synchronisation test solution for operators. This module is compatible with OTP6200v2 (OPWILL Intelligent Network Test Platform).

OTM2515/OTM2516/OTM2517 -- 155M/622M/2.5G SDH/SONET Tester

OTM2515 (155M), OTM2516 (622M), and OTM2517(2.5G) SDH/SONET Module is a battery-operated handheld test solution for testing legacy PDH/DSn,SDH/SONET circuits from 2.5Gbps to 2Mbps/1.5Mbps,both in-service and out-of-services, supports overhead monitoring, APS timing etc. OTM2515 can be upgraded to OTM2516 or OTM2517. OTM2516 can be upgraded to OTM2517. This module is compatible with OTP6200v2 (OPWILL Intelligent Network Test Platform).

OTM2620 -- 100G Ethernet/OTN Modulea

OTM2620 100G Test Module is a new modular product, which is released by OPWILL in 2015. This module is designed for satisfying the current increasingly test demand of Core Network and MAN 100GE/40GE and OTU4/OTU3E1/OTU3E2/OTU3 such high speed network performance and stability. This module is compatible with OTP6200v2 (OPWILL Intelligent Network Test Platform).

OTP6126 -- Handheld Ethernet Test Set

OTP6126 Handheld Gigabit Ethernet Test Set is designed and manufactured by OPWILL, which is specialised in one Gigabit Ethernet network deployment and comprehensive test, and compatible with indoor laboratory and outdoor field environment. It can fully meet Ethernet standard, support the latest version of ITU-T; Y.1564; IETF RFC2544; IETF RFC3393; IEEE 802.3; IEEE802.1 standards or recommendations and so on.

OTM2612 -- 10G Ethernet/SDH/OTN Tester

OTM2612 10G Packet Ethernet/SDH/OTN Test Module is a multi service test solution for the installation and maintenace for Metro/Carrier Ethernet, IP service, SDH/SONET, OTN circuit test up to 10G. Not only does it supply a compact test solution for 10G packet Ethernet, include ITU-T Y.1564 Standard for SLA test features, but also for SDH/SONET supports Out-of Service test, Round Trip Delay, In-service test, overhead controlling and decoding, troubleshooting, APS timing etc. This module is compatible with OTP6200v2 (OPWILL Intelligent Test Platform).

FTS20 -- Optical Power Meter

FTS20 Series Optical Test Kits include Optical Power Meter, Optical Light Source, and Optical Loss Tester. Portable design and light weight provide huge benefits and convenience for the engineer to detect optical fibres or cables in core, metro, and access network with high flexibility, and efficiency. Meanwhile, it can transfer the data by USB interface or Bluetooth, easy to generate test report.

PFS-220T -- Fusion Splicer

PFS-220T Fusion splicer is used for joining two optical fibers end-to-end using heat, to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice, and so that the splice and the region surrounding it are almost as strong as the virgin fiber itself.

< 1 2 3 >

Address: RoomA-1445, Level 6, No.28 Shangdi Information Road, Haidian District, Beijing, PRC.
Postal code: 100085
Tel:+86 10 82771386/2866/3382
Fax:+86 10 82771782
400 hotline: 400 630 3382
Website: www.opwill.com

OPWILL not only serves major domestic operators, equipment manufacturers, private network users and communication service contractors, but also sells to more than 30 countries and regions in the world.