What are the Differences Between OTN and SDH Testing?
Both SDH (Synchronous Digital Hierarchy) and OTN (Optical Transport Network) are optical transport technologies. Due to differences in network architecture and carried services, there are obvious disparities in testing priorities.
SDH adopts STM-N time-slot multiplexing. It mainly carries E1 and low-speed Ethernet services. In live networks, it is mostly applied for maintenance and inspection of legacy MSTP and traditional transmission links. Its core testing items include frame overhead, pointer adjustment, APS switching and clock synchronization performance, with small service granularity.
Key Live-network Testing Items for SDH
- Overhead analysis, error code and alarm insertion
- G.783 pointer adjustment
- PDH/SDH mapping and E1 tributary services
- APS protection switching time
- Optical power, receiver sensitivity, clock frequency and frequency offset testing
OTN (Optical Transport Network) employs ODU container encapsulation. It supports large granularity services of 10G/40G/100G/400G and serves backbone networks, 5G bearer and DCI (Data Center Interconnect). Core testing focuses on OTU/ODU/OPU overhead, multilevel mapping and multiplexing, OPUk rate justification (frequency offset insertion and detection), FEC, optical channel performance and latency. It also supports ODUflex for flexible bandwidth.
Key Live-network Testing Items for OTN
- Three-layer overhead of OTU/ODU/OPU, error code and alarm insertion
- OPUk rate justification (JC justification), G.709 frame rate tolerance testing
- Multiservice mapping/demapping, multilevel multiplexing and ODUflex
- FEC performance, APS switching and service interruption latency
- Optical layer: optical carrier frequency offset, optical power and receiver sensitivity
Commonly-used OPWILL Test Instruments for Live network Deployment
In terms of test scenarios, SDH testing is mainly used for maintenance of legacy transmission equipment and inspection of existing links, while OTN testing targets highspeed service deployment such as backbone networks, 5G bearer and data center interconnection.
In terms of instrument functions, SDH instruments focus on electrical interfaces and clock synchronization, whereas OTN instruments emphasize high-speed optical ports, multi-service mapping, frame capture and high-bandwidth error-code testing. Some instruments can share the same hardware platform, yet their test objects and metrics are not interchangeable.
SDH Test Instruments (Legacy Network Operation & Maintenance)
- OTM2517 Module: Supports STM1/4/16 and E1/E2/E3/E4 tributaries. It conducts pointer and APS switching tests for on-site operation and maintenance of traditional SDH/MSTP networks.
- OTM2612 Module: Three-in-one solution for SDH up to 10G, 10G OTN and Ethernet. Used for commissioning and inspection of metro legacy networks.

OTN Test Instruments (Metro / Backbone / DCI)
- OPfg01: Four-in-one instrument supporting SDH, OTN, Ethernet and fgOTN at rates up to 10G. It covers multi-service on-site testing with a single unit.
- OTM2620 Module: For 40G/100G OTN (OTU3/OTU4). Used for acceptance of backbone 100G OTN, including FEC, latency, mapping and multiplexing tests.
- MTS1410 Portable 400G Optical Transport Analyzer: Supports OTUCn/FlexO/SDH with high-precision frequency-offset injection. Designed for on-site testing of 400G backbone networks and DCI.

PRE
PRE